Railway Vehicles
Catenary installation and maintenace vehicle ADM-1.5BM
Specifications
General | |
wheel gauge, mm | 1520 |
power unit output, kW (hps) | 239 |
engine type | Diesel engine Cummins QSM11 |
gear-box type | VOITH 884.5 DIWA |
own deck cargo capacity, t | 5 |
maximum speed, km/h | 100 |
crawling speed max., km/h | 0-5 |
max. towing capacity at shunting mode, t | 400 |
passenger capacity, pers. | 9 |
proper weight, t | 35 |
Crane | |
type of crane | articulated jib |
load lifting capacity at min. outreach, outriggers deployed, t | 8,2 |
load lifting capacity at max. outreach, outriggers deployed, t | 2,79 |
load hook lifting height, meters from rail top level | 11,8 |
max. load hook outreach, meters from track centre | 8,0 |
min. load hook outreach, meters from track centre | 2,7 |
Drilling equipment | |
make | MBL |
min. auger outreach, meters from track centre | 3,0 |
max. auger outreach, meters from track centre | 6,0 |
max. pit depth, m | 5,0 |
max. pit diameter, m | 0,8 |
min. pit diameter, m | 0,65 |
Overall dimensions of the vehicle | |
length between couplers axis, mm | 13170 |
width, mm | 3150 |
height, mm | 5280 |
wheel base, mm | 7000 |
The vehicle was designed to carry out the following operations:
- Drilling of pits for installation of catenary masts;
- Maintenance, installation and dismounting of catenary masts and other elements of catenary system;
Transportation of loads on coupled wagons;
Delivery of workers to site;
Shunting at station yards;
Power supply to welding equipment at work site;
Power supply to electrical equipment working at 380/220V, 50Hz.;
ADM-1.5BM catenary installation vehicle is fully self-propelled. The control cabin is mounted on the front end of the vehicle frame. The cargo lifting articulated jib is placed on the rear end of the vehicle and serves to perform cargo handling, installation or de-installation of catenary masts. The elements of the auger are transported fixed to the frame deck between the cabin and the crane. The auger is set in the operating mode with the help of the articulated jib. Cummins Diesel engine is installed under the frame in its middle section.
Torgue is transmitted from hydraulic gear box to the 3-phase alternator and cardan shafts. Torque from cardan shafts is further transmitted to the axle gear boxes of wheel-sets. The air-compressor is driven by belt-drive.
Our Clients
Contact
-
Transputmash, LLC
3rd Sokolnitcheskay St., 5/1, Moscow, Russia, 107014
Ph.: +7 (499) 748-02-29
Fax: +7 (499) 268-53-04
Map view
Feedback Form
- Track maintenance vehicles
- For track maintenance
- For city underground railways
- Catenary maintenance vehicles
- 1ADM-1.3
- 1ADM-1.5kb
- Special purpose vehicles
- Vibration loader AVF-1M.2
- UKBS